9-1-92

To: Sysop

I'm running Netware 3.11 and Netware for MacIntosh 3.01.  I have two postscript printers hooked to one of my two Mac's.  I have configured two zones, Admin and NEC. 
Lines in my autoexec.ncf that relate to my Mac's and Zone information are as follows:

load appletlk -z net=50001
load toke frame=token-ring_snap name=ttalk
bind appletlk ttalk net=10-12
load afp
load atps -v

atps.cfg
"Silentwriter:NEC" -o "LC890"
"AGFA StudioSet 2000:NEC" -o "AGFA"

atzones.cfg
net=50001={"Admin"}
net=10-12 zone={"Admin"},
"NEC"
}


Currently my Mac's and PC's can both print to both printers with the help of Liaison running on one Mac.  I have read that with Netware for MacIntosh that you can hook a printer to the fileserver, a printserver, or a remote PC running Rprinter and the Mac's will be able to print to that printer.  I have a HP LaserJet III with a postscript cartridge that I would like to print to with the Mac's. The printer is currently hooked to a PrintServer, but I anticipate the printer going to a remote PC running Rprinter.  The magizines say it can be done but none tell you how.  Can I simply add a line in the atps.cfg file that sayes "HP LaserJetIII".  The Netware for MacIntosh book sayes it will default to the internal net zone of Admin.  I already have a que HP on the fileserver for Rprinter and on the printserver depending on where I have the printer hooked up.  If anyone has made this work, I would appreciate the help.

Jim McIver
Fax: 208-746-7341
...74617866....2400 N81N         folio..................1 801 375 99072400 N81N         data world bbs.........16156753282..2400 N81N         In House 1200200......746-1786-....1200 N81N         ......................... ... ...-....1200 N81N         ......................... ... ...-....1200 N81N         ......................... ... ...-....1200 N81N         ......................... ... ...-....1200 N81N         ......................... ... ...-....1200 N81N         ........